6
Integrating McAfee DLP Endpoint into a unified policy system
Setting up Unified DLP on ePolicy Orchestrator
Setting up Unified DLP on ePolicy Orchestrator
After ePolicy Orchestrator and McAfee DLP Manager are connected, you must install host and network
extensions on McAfee ePO, and add evidence folders on ePolicy Orchestrator and McAfee DLP
Manager.
Install the network extension
You must install the latest network extension on ePolicy Orchestrator to establish a connection to
McAfee DLP Manager.
Before you begin
An ePolicy Orchestrator database user must be set up before the network extension is
installed.
Task
Open a web browser and enter the location of the network extension into the address bar.
1
https://<DLP_Manager_name>/eponetdlp/netdlp.zip
Log on to the ePolicy Orchestrator and go to Menu | Software | Extensions.
2
Click Install Extension.
3
Browse to the netdlp.zip file and click OK.
4
Click OK.
5
Install the UDLP (host) extension
You must install UDLP extension version 9.2.107 on ePolicy Orchestrator to establish a connection to
ePolicy Orchestrator.
Task
Download UDLP extension version 9.2.107 from the McAfee Support Portal to your desktop.
1
Log on to the ePolicy Orchestrator and go to Menu | Software | Extensions.
2
Click Install Extension.
3
Browse to the UDLP extension on your desktop and click OK.
4
Click Policy Catalog and select View/Duplicate to configure the agent.
5
The McAfee DLP Endpoint Management Tools installer runs, then the agent configuration console
begins loading. Add the required information to the fields.
Assign this policy to the agent.
6
If the agent configuration is not deployed on the endpoint computer, none of the protection rules
will work.
68
McAfee Data Loss Prevention 9.2.1
The extension can also be downloaded from the McAfee Support Portal, or copied from the /data
directory of the downloaded and expanded McAfee DLP Manager directory.
Installation Guide