McAfee DTP-1650-MGRA - Network DLP Manager 1650 Appliance Installation Manual page 40

4
Configuring McAfee DLP appliances and adding servers
Add LDAP servers to McAfee DLP Manager
Do one of the following:
4
• Enter the Domain of the LDAP server.
If you use this option, you must log on to an administrative account on the LDAP server. The
system will then query the Domain Name Server to find the domain controller for the Active
Directory domain.
Figure 4-7 Add LDAP server
• In the Authorization Server field, enter the name or IP address of the server.
If you are using SSL (Secure Sockets Layer) to encrypt the connection, you must enter the
FQDN (fully qualified domain name) cited in the uploaded certificate.
Unlike the LDAP server domain name, you can use any valid account that has permission to
read from the LDAP server (an administrative account is not necessary). If you have already
entered the domain name of the LDAP server, any information you enter here will be ignored.
Type in the Server Port to be used for the connection.
5
In the Timeout and Retries fields, set intervals for connection (in seconds).
6
Type in the Loginid Attribute.
7
Type in the user name (Login DN) and Password.
8
40 McAfee Data Loss Prevention 9.2.1
Use samaccountname to retrieve user names from the server.
Installation Guide