Installing Mcafee Dlp Endpoint Verify System Requirements; Verify System Requirements - McAfee DTP-1650-MGRA - Network DLP Manager 1650 Appliance Installation Manual

5
Installing McAfee DLP Endpoint

Verify system requirements

Verify system requirements
The following hardware is recommended for running McAfee DLP Endpoint software version 9.2 Patch
2.
Table 5-1 Hardware requirements
Hardware type
Servers
Managed
workstations
Network
The following Microsoft operating system software is supported.
Table 5-2 Operating systems supported
Computer type
Servers
Managed workstations
The user installing McAfee DLP Endpoint software on the servers must be a member of the local
administrators group.
The following software is required on the server running the McAfee DLP Endpoint policy console and
McAfee DLP Monitor.
46 McAfee Data Loss Prevention 9.2.1
Specifications
• CPU — Intel Pentium IV 2.8 GHz or higher
• RAM
• 512 MB minimum for McAfee Device Control software only (1 GB
recommended)
• 1 GB minimum for full McAfee DLP Endpoint software (2 GB
recommended)
• Hard Disk — 80 GB minimum
• CPU — Pentium III 1 GHz or higher
• RAM
• 256 MB minimum for McAfee Device Control software (1 GB
recommended)
• 512 MB minimum for full McAfee DLP Endpoint software (1 GB
recommended)
• Hard Disk — 200 MB minimum free disk space
100 megabit LAN serving all workstations and the McAfee ePO server
Software
• Windows Server 2003 Standard (SE) SP1 or later 32‑ or 64‑bit
• Windows Server 2003 Enterprise (EE) SP1 or later 32‑ or 64‑bit
• Windows Server 2008 Enterprise 32‑ or 64‑bit
• Windows XP Professional SP3 or later 32‑bit
• Windows Vista SP1 or later 32‑bit only
• Windows 7 or later 32‑ or 64‑bit
• Windows Server 2003 SP2 32‑ or 64‑bit
• Windows Server 2008 SP2 32‑bit
• Windows Server 2008 R2 64‑bit
Servers are supported for McAfee Device Control software only.
Installation Guide