Apply A Hotfix; Convert An Installation To Another Mcafee Dlp Product - McAfee DTP-1650-MGRA - Network DLP Manager 1650 Appliance Installation Manual

2
Installing or upgrading the software on 4400 appliances

Apply a hotfix

Apply a hotfix
Apply a hotfix by running a script that installs the hotfix.
Before you begin
Download the product hotfix archive and copy it to the appliance.
Task
Log on to the appliance as root.
1
Copy the archive to the appliance.
2
• If you downloaded the archive to a Windows‑based computer, use WinSCP.
If you are copying the archive from a Linux server, use the SCP command scp ‑rp <hotfix
•
_package> root@<name or ip address>:<directory>
Make an installation directory.
3
# mkdir /data/hotfix
From the directory you downloaded the archive to, extract the contents of the archive, using the ‑C
4
option to expand it into the /data/hotfix directory.
# tar xvzf hotfix_xxxxxx_yyyy_zz.tar.gz ‑C /data/hotfix
Go to the /data/hotfix directory.
5
# cd /data/hotfix/xxxxxx
(Optional) Open the README file to see the hotfix details.
6
Run the installation script.
7
# ./install_hotfix
Restart the Stingray service.
8
# service stingray restart

Convert an installation to another McAfee DLP product

The 4400 appliance ships with McAfee DLP Manager, but that installation can be converted to another
Data Loss Prevention product. However, only one product can be installed on the appliance, so the
primary and secondary images must both be installed with that product.
Before you begin
Download the product archive and copy it to the appliance.
Task
Log on to the appliance as root.
1
Go to the installation directory.
2
# cd /data/install
20 McAfee Data Loss Prevention 9.2.1 Installation Guide