Register Mcafee Dlp Manager On Epolicy Orchestrator Server; Register Epolicy Orchestrator On Mcafee Dlp Manager - McAfee DTP-1650-MGRA - Network DLP Manager 1650 Appliance Installation Manual

On the ePO User Information page, enter and confirm a password.
2
The ePolicy Orchestrator User Name is not configurable.
In the IP Address field, enter an IP address for the ePolicy Orchestrator user's account, then click Add
3
to add it to the Selected IP Addresses list.
Repeat if more than one ePolicy Orchestrator user is needed.
Click Apply.
4

Register McAfee DLP Manager on ePolicy Orchestrator server

Registering McAfee DLP Manager on ePolicy Orchestrator completes the connection between the two.
Before you begin
You must have an ePolicy Orchestrator database user ready for entry on the ePolicy
Orchestrator Registered Server Builder page.
After McAfee DLP Manager and ePolicy Orchestrator are registered to each other, the extensions and
the McAfee Agent DLP client can be set up to manage McAfee DLP Endpoint communications between
the systems.
Task
In ePolicy Orchestrator, select Menu | Configuration | Registered Servers.
1
Click New Server.
2
Type in the name of the McAfee DLP Manager, add optional notes, and click Next.
3
The Registered Server Builder page appears.
In the Description field, type in the name of the McAfee DLP Manager.
4
In the Database Password field, type in the epouser database password from the McAfee DLP Manager
5
System | User Administration | DB User page.
This password allows access to the McAfee DLP Manager MySQL database from ePolicy
Orchestrator.
If applicable, select the Copy Incidents/Device Data.
6
Type in the user name and password to McAfee DLP Manager and set the refresh period.
7
Click Test Connection.
8
If the test is successful, click OK.
9

Register ePolicy Orchestrator on McAfee DLP Manager

Registering ePolicy Orchestrator on McAfee DLP Manager initiates the connection between the two.
Before you begin
The network and unified DLP extensions must be installed at this point. You must have
ePolicy Orchestrator registration information ready for entry on the Add New Device page.
Task
Open the Devices page in one of two ways:
1
• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Sys Config | System Administration |
Devices.
McAfee Data Loss Prevention 9.2.1
Integrating McAfee DLP Endpoint into a unified policy system
Connecting McAfee DLP Manager and the ePolicy Orchestrator server
6
Installation Guide 71