Upgrade The Products On 1650 Or 3650 Appliances - McAfee DTP-1650-MGRA - Network DLP Manager 1650 Appliance Installation Manual

10 Go to the product installation directory under the /data directory.
# cd /data/install
11 Run the application installation script.
# ./install_stingray ‑P <platform type>
The script completes, then instructs you to reboot.
12 Restart the system.
# reboot
13 Install the application.
# ./install_stingray –P <platform type>
14 Restart the system.
# reboot
15 Log on to the McAfee DLP device as root, go to the installation directory, and verify the installation
with the command:
# cat /data/stingray/etc/version
If the Release field contains 9.2.1, installation is complete.

Upgrade the products on 1650 or 3650 appliances

To upgrade a product on 1650 or 3650 appliances, you must install 9.2.0 before upgrading to 9.2.1.
Before you begin
Download the product archive and copy it to the appliance.
Task
Log on as root to the 1650 or 3650 appliance.
1
Copy the archive to the appliance.
2
• If you downloaded the archive to a Windows computer, use WinSCP.
If you are copying the archive from a Linux server, use the SCP command scp ‑rp <package
•
number> root@<name or ip address>:<directory>
Make an installation directory.
3
# mkdir /data/install
McAfee Data Loss Prevention 9.2.1
Installing or upgrading software on 1650 and 3650 appliances
Restarting the system might take 10‑15 minutes.
Enter ./install_platform to display the current platform type, along with other options.
Stop all scans and search tasks before upgrading, and wait until they are completely stopped before
upgrading.
If the patch installation fails, do not install it again. Call McAfee support and submit an installation log
file.
Upgrade the products on 1650 or 3650 appliances
3
Installation Guide 25