This section explains how to interpret the projector's status lights, solve problems, and
contact technical support.
What To Do When the Lights Flash
The lights on top of the projector indicate its status and let you know when a problem occurs.
If all lights are off, make sure the power cable is connected correctly.
light is orange.
The projector is in sleep mode. Press the
remote control to turn it on.
light is flashing green.
The projector is warming up. Wait for the picture to appear. This can take a few minutes.
light is flashing orange.
The projector is cooling down. Wait until the light stops flashing before you unplug the
light is green.
The projector is operating correctly. If you don't see a picture, open the lens cover slide.
button on the projector or the
button on the