■ Sleep 10, 20, 30, 60, 90, 120, 150:
number of minutes specified, whether or not a movie is playing. You can select from
After you set the sleep timer, you can see the time remaining by pressing
Note: Sleep timer settings are not saved after you turn the projector off.
Changing Language Settings
You can use the Language Setup Page to change the default language for DVDs that allow
you to make this selection.
1. Press the
button on the remote control. You see the Language Setup Page:
to highlight the setting you want, then press
be available, depending on the DVD or DivX file you are playing.
to select the language you want, then press
codes, see page 73.
4. To exit the menu, press
Adjusting Picture Quality
You can use the Image page on the Visual Setup menu to adjust the
brightness, contrast, color saturation, tint, sharpness, and other settings
that affect image quality.
Note: You cannot change Image page settings when the Color Mode is set
on the remote control. You see the Visual Setup menu.
until you see the option you want to set.
The power switches off automatically after the
is the language used for the projector's menus. Other settings may not
to display the list of languages
to save it. For a list of language
Doing More with Your Projector