The lamp usage timer displays
Storing Your PowerLite Projector
Follow these guidelines when storing the projector:
Make sure the temperature and humidity of the storage area are within the recommended
range for the projector: –10 to 60 °C and 20 to 80% relative humidity without
Make sure all discs are ejected.
Close the lens cover and retract the feet.
Remove the batteries from the remote control.
Place the projector in its padded bag. You can stand it on end for convenient
Package the projector in its original packaging or equivalent (as described in
the following section).
Transporting Your Projector
Note: Epson shall not be liable for any damages incurred during transportation.
Your projector contains many glass and precision parts. If you need to transport it, follow
these guidelines to prevent damage:
When shipping the projector for repairs, use the original packaging material if possible. If
you do not have the original packaging, use equivalent materials, placing plenty of
cushioning around the projector. Be sure the carrier is capable of transporting fragile
equipment and is aware that the projector is fragile.
If you move the projector from a cold environment into a warm room, condensation
(moisture) may form internally or on the lens surface. To avoid damage that might be
caused by condensation, wait approximately an hour before using the projector. If
condensation forms, turn off the power, then wait an hour or two before use.
When you are hand-carrying the projector, make sure all discs are ejected, the lens cover
is closed, and the feet are retracted.
Caring for Your Projector
(zero hours) until you've used the lamp for at least
to reset the timer.