5. Open the lens cover, then connect the power cord and plug in the projector. The
light turns orange.
Once you've finished setting up the projector, do one of the following:
If you would like to play a DVD, see "Playing discs" on page 20.
If you would like to connect other equipment to the projector, see "Using Your Projector
with Other Equipment" on page 30.
Turning the Projector Off
1. If there is a disc inside the projector, eject it. Press the
2. Press the
button on the projector or the
will beep twice when it is finished powering off.
Warning: Do not disconnect the power cable before the projector beeps, or you may damage
3. Close the lens cover.
button to eject it.
on the remote control. The projector
Unpacking and Setting Up