Download Table of Contents Print this page

Viewing Status Information And Resetting The Lamp Timer - Epson PowerLite Presenter L User Manual

Hide thumbs Also See for PowerLite Presenter L:


Table of Contents
5. Press
to exit the menu.

Viewing Status Information and Resetting the Lamp Timer

You can use the Info page on the Visual Setup menu to view the number of hours the lamp
has been used, and to reset the timer after you install a new lamp. You can also view video
signal information and error codes for any problems that occur.
1. Press
on the remote control. You see the Visual Setup menu.
2. Press
to highlight
Note: If the lamp has been used less than 10 hours, 0H is displayed.
3. To reset the lamp timer after replacing the lamp, press
4. Press
to exit.
, then press
to display the lamp usage and other
Doing More with Your Projector


Table of Contents

Table of Contents