Download Table of Contents Print this page

Caring For Your Projector; Protecting Powerlite Projector; Cleaning The Lens - Epson PowerLite Presenter L User Manual

Hide thumbs Also See for PowerLite Presenter L:


Table of Contents

Caring for Your Projector

The projector needs little maintenance. All you need to do on a regular basis is keep the lens
clean. You also may need to clean the air filter to help prevent overheating.
Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never
open any part of the projector, except as described in this User's Guide. Dangerous electrical
voltages in the projector can injure you severely. Do not try to service this product yourself, except
as specifically explained in this User's Guide.
The only parts you should replace are the lamp and air filter. If another part needs replacing,
contact Epson or a qualified servicer (see page 65).
Follow the instructions in this section to clean the lens and case, clean and replace the air
filter, replace the lamp, and store or transport the projector.

Protecting PowerLite Projector

The projector is designed for use virtually anywhere. However, the projector and its
accessories should not be exposed to water, smoke, direct heat or sunlight, or left outside for
long periods of time. As with other electronic equipment, please avoid exposure of the
projector to moisture, dust, smoke, and other environmental factors which may result in
damage to internal electronics over time. See the warranty brochure included with your
projector for additional details on the use of the projector.

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.
To remove dirt or smears, use lens-cleaning paper. If necessary, moisten a soft cloth with lens
cleaner and gently wipe the lens surface.
Caution: Never rub the lens with abrasive materials.
Caring for Your Projector


Table of Contents

Table of Contents