Download Print this page

Epson PowerLite Presenter L User Manual page 64

Hide thumbs

Advertisement

If you're using a PC notebook, hold down the Fn key on the keyboard and press the
function key that lets you display on an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up
after pressing it. Check your notebook's manual or online help for details.
On most systems, the
projector, or display on both at the same time.
If you connect the notebook while the projector or computer are already turned on, the
function Fn key that changes the computer's image signal to external output may not
work. Turn the computer and the projector off and then back on again.
You see the message
Press the
page 48).
The picture is cut off (too large) or too small.
Press the
Press the
sure the toggle switch on the remote control is set to the
The picture is distorted.
If you're using an extension cable, electrical interference may affect the signal.
Check the solutions on pages 61 and 62.
The colors are not right.
Press the
page 48).
Press the
environment.
Adjust the
64
Problem Solving
key lets you toggle between the LCD screen and the
Signal not supported.
button on the remote control and check the
button on the remote control and select the appropriate aspect ratio.
button on the remote control and select the appropriate zoom setting. (Make
button on the remote control and check the
button on the remote control to select the best setting for your viewing
or
Color Saturation
Func-
settings. See page 45.
Tint
setting (see
Video Signal
position.)
setting (see
Video Signal

Advertisement

loading

  Related Manuals for Epson PowerLite Presenter L