Troubleshooting - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents

Troubleshooting

The troubleshooting page lists the status for some common
sources of errors. The list may be different for different
products and installations * .
Note that critical issues and errors are clearly marked in red
color; warnings are yellow.
* The messages shown in the illustration serve as examples. Your
system may show other information.
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface Web interface
Navigate to: Diagnostics > Troubleshooting
System settings
Run diagnostics
Click Re-run diagnostics
the information in the list is up-to-date.
Leave standby mode
This button is only visible when the
system is in standby mode. If in
standby mode, click
to wake up the system.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
49
Administrator Guide
Setting passwords Appendices
to make sure
Deactivate standby