Placing A Call - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
Contents

Placing a call

You can use the Call Control page to place a call.
Even if the web interface is used to initiate the call,
it is the video system (display, microphones and
loudspeakers) that is used for the call; it is not the PC
running the web interface.
Calling
You can call someone either by choosing a contact name
in the Favorites, Directory or History lists, or by typing a
complete URI or number in the Search or Dial field. Then click
Call in the associated contact card.
Searching the contact lists
Enter one or more characters in the Search or Dial field.
Matching entries from the Favorites, Directory and History
lists will be listed as you type.
Select the correct entry in the list before you click Call.
Calling more than one
A point-to-point video call (a call involving two parties only)
may be expanded to include more participants.
If your system supports the optional built-in MultiSite feature,
up to four participants, yourself included, can join the video
call (conference).
One additional participant can join on audio-only.
Follow the same procedure to call the next conference
participant as you did when calling the first participant.
D14908.06 SX20 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface Web interface
Navigate to: Call Control
Click a contact name, either in the
Favorites, Directory or History lists. Then
Alternatively, enter the complete URI
or number in the Search and Dial field.
Then click the
System settings
Calling someone
click Call in the contact card.
Call button that appears
next to the URI or number.
14
Setting passwords
Holding and resuming Ending a call
If you want to terminate a
Use the button next
call or conference, click
to the participant's name
All. Confirm your choice in
to put him on hold.
the dialog that appears.
To resume the call,
To disconnect just one
use the button
participant in a conference,
that is present when a
click the
participant is on hold.
participant.
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
End
button for that