Accessing The Web Interface - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
Contents

Accessing the web interface

The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In this chapter you will find information how to use the web
interface for system configuration and maintenance.
We recommend that you use the latest release of one of the
major web browsers.
* The Settings menu can be accessed from the drop down window
that appears when you tap the contact information in the upper, left
corner of the Touch controller.
D14908.06 SX20 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface Web interface
1. Connect to the video system
Open a web browser and enter the IP address of
the video system in the address bar.
To find the IP address (IPv4 or IPv6),
open the
controller and tap
or navigate to
System information
control and the on-screen menu.
System settings
Settings menu on the Touch
*
System Information;
Home > Settings >
when using a remote
2. Sign in
Enter the user name and password for your
video system and click
10
Setting passwords
Sign In.
The system is delivered with a default
user named admin with no password
(i.e. leave the Password field blank
when signing in for the first time).
We strongly recommend that you set
a password for the admin user, see
the next page.
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Signing out
Hover the mouse
over your user
name and choose
Sign out from the
drop-down list.