Setting The Administrator Settings Menu Password - Cisco Codec C Series Getting Started Manual

Cisco TelePresence Video Systems
Contents

Setting the Administrator settings menu password

When starting up the system for the first time, the Administrator
Settings menu password is not set.
NOTE: We strongly recommend that you define a password to
protect the Administrator Settings menu, because these settings
affect the behavior of the video conference system.
1. Go to Home > Settings > Administrator settings > Set menu
password.
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with an asterisk (*).
3. Select Save to confirm the changes, or
without saving.
4. Press Home ( ) to exit.
Back to task overview
D14639.12 Video Systems Getting Started Guide TC7.0, DECEMBER 2013.
Introduction User interfaces
Cancel to leave
Confirguration Configuration
22
Getting Started Guide
Appendices Contacts
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.