Bosch MIC IP PSU User Manual page 82

82 en | Configuration using a Web browser
Configuration
You can save configuration data for the encoder on a computer and then load saved
configuration data from a computer to the unit.
Upload
1.
2.
3.
Once the upload is complete, the new configuration is activated. The time remaining is shown
in the message going to reset Reconnecting in ... seconds. The unit reboots automatically
once the upload has successfully completed.
Download
1.
2.
SSL certificate
To be able to work with an SSL encrypted data connection, both ends of a connection must
hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple
files, onto the encoder.
If you wish to upload multiple files onto the encoder, you must select them consecutively.
NOTICE!
The certificate must be created in the format *.pem so that it can be accepted by the unit.
1.
2.
3.
The new SSL certificate is valid.
Download logfile
You can download an internal maintenance log from the unit to send it to Customer Service
for support purposes. When doing this, ensure that HTTPS browser port is not set to Off and
TLS 1.0-support is activated for your browser. Click Download and select a storage location
for the file.
Upload history
Click Show to display the upload history.
F.01U.265.804 | 1.6 | 2012.08
Enter the full path of the file to upload or click Search to select the required file.
Make certain that the file to be loaded comes from the same unit type as the unit you
want to configure.
Next, click Upload to begin transferring the file to the unit. The progress bar allows you to
monitor the transfer.
Click the Download button. A dialog box opens.
Follow the on-screen instructions to save the current settings.
Enter the full path of the file to upload or click Search to select the required file.
Next, click Upload to begin transferring the file to the unit.
Once all files have been successfully uploaded, the unit must be rebooted. In the address
bar of your browser, enter /reset after the IP address of the encoder (for example
192.168.0.10/reset).
User Manual
MIC Series IP Power Supply
Bosch Security Systems, Inc.