Bosch MIC IP PSU User Manual page 58

58 en | Configuration using a Web browser
For long-term, authoritative images, it is essential that you use an appropriately sized iSCSI
system.
It is also possible to let the VRM Video Recording Manager control all recording when
accessing an iSCSI system. This is an external program for configuring recording tasks for
video servers. For further information please contact your local customer service at Bosch
Security Systems.
Device manager
If you have added the device to a VRM system, the VRM Video Recording Manager will manage
all recording. In this case the Managed by VRM box is checked and you will not be able to
configure any further settings here.
Recording media
Select the required recording media here so that you can then activate them and configure
the recording parameters.
iSCSI Media
If you want to use an iSCSI system as a recording medium, you must set up a connection to
the required iSCSI system and set the configuration parameters.
NOTICE!
The iSCSI storage system selected must be available on the network and completely set up.
Amongst other things, it must have an IP address and be divided into logical drives (LUN).
1.
2.
3.
Local Media
The supported local recording media are displayed in the Storage overview field.
Activating and configuring storage media
The storage overview displays the available storage media. You can select individual media or
iSCSI drives and transfer these to the Managed storage media list. You can activate the
storage media in this list and configure them for storage.
CAUTION!
Each storage medium can only be associated with one user. If a storage medium is already
being used by another user, you can decouple the user and connect the drive with the
encoder. Before decoupling, make absolutely sure that the previous user no longer needs the
storage medium.
1.
2.
3.
4.
F.01U.265.804 | 1.6 | 2012.08
Enter the IP address of the required iSCSI target in the iSCSI IP address field.
If the iSCSI target is password protected, enter this into the Password field.
Click the Read button. The connection to the IP address will be established. In the
Storage overview field, you can see the corresponding logical drives.
In the Recording media section, click the iSCSI Media and Local Media tabs to display the
applicable storage media in the overview.
In the Storage overview section, double-click the required storage medium, an iSCSI LUN
or one of the other available drives. The medium is then added to the Managed storage
media list. In the Status column, newly added media are indicated by the status Not
active.
Click the Set button to activate all media in the Managed storage media list. In the Status
column, these are indicated by the status Online.
Check the box in the Rec. 1 or Rec. 2 column to specify which recording should be
recorded on the storage media selected.
User Manual
MIC Series IP Power Supply
Bosch Security Systems, Inc.