Bosch MIC IP PSU User Manual page 21

MIC Series IP Power Supply
Figure 3.8 Encoder connections front (top half of graphic) and back (bottom half of graphic)
Number Description
1
2
3
4
5
6
7
8
9
Bosch Security Systems, Inc.
VIDEO IN video input
BNC socket (75 ohm) for connecting the video source
SD CARD slot
(The release letter of the current firmware version has a list of compatible cards.)
POWER LED
lights up green when ready for operation
(See "LEDs" in the User Manual for more information about the LEDs.)
Factory reset button
to restore factory default settings
LINE IN/OUT
For audio connection (not applicable to MIC cameras)
Terminal Block
for alarm inputs, relay outputs, serial interface and power supply
(See "Terminal block" in the Appendix of the User Manual for details.)
Green LED
lights up when the unit is connected to the network
Orange LED
lights up during data transmission
ETH RJ45 socket
for connecting to an Ethernet LAN (local network), 10/100 MBit Base-T
User Manual
Installation | en 21
F.01U.265.804 | 1.6 | 2012.08