Bosch MIC IP PSU User Manual page 74

74 en | Configuration using a Web browser
appropriately set up so that, once an IP address is assigned, it is retained each time the
system is rebooted.
Ethernet
Fill in the fields for the appropriate IP version: IPv4 or IPv6.
IP address
Enter the desired IP address for the encoder in this field. The IP address must be valid for the
network.
Subnet mask
For IPv4 only, enter the appropriate subnet mask for the selected IP address here.
Prefix length
For IPv6 only, enter the number of characters in the prefix.
Gateway address
If you want the unit to establish a connection to a remote location in a different subnet, enter
the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).
DNS server address
The unit can use a DNS server to resolve a mail or FTP server address specified as a name.
Enter the IP address of the DNS server here.
NOTICE!
Click the Details button to reveal the rest of the fields in this page.
Enable DynDNS
DynDNS.org is a DNS hosting service that stores IP addresses in a database ready for use. It
allows you to select the encoder via the Internet using a host name, without having to know
the current IP address of the unit. You can enable this service here. To do this, you must have
an account with DynDNS.org and you must have registered the required host name for the
unit on that site.
NOTICE!
Information about the service, registration process and available host names can be found at
DynDNS.org.
Host name
Enter the host name registered on DynDNS.org for the encoder here.
User name
Enter the user name you registered at DynDNS.org here.
Password
Enter the password you registered at DynDNS.org here.
Force registration now
You can force the registration by transferring the IP address to the DynDNS server. Entries
that change frequently are not provided in the Domain Name System. It is a good idea to force
the registration when you are setting up the device for the first time. Only use this function
when necessary and no more than once a day, to avoid the possibility of being blocked by the
service provider. To transfer the IP address of the encoder, click the Register button.
F.01U.265.804 | 1.6 | 2012.08 User Manual
MIC Series IP Power Supply
Bosch Security Systems, Inc.