Husqvarna TE 610E Owner's Manual page 26

RAPPORTI TOTALI DI TRASMISSIONE (TE 610E)
in 1 a velocità.....................................18,389
in 2 a velocità.....................................12,744
in 3 a velocità.......................................9,492
in 4 a velocità.......................................7,670
a
in 5 velocità.......................................6,445
in 6 a velocità.......................................5,409
TELAIO
Tipo ....................monotrave in tubi a sezione
circolare, in acciaio; telaietto posteriore in
tubi a sezione quadrata, in acciaio
SOSPENSIONE ANTERIORE
Tipo .................. forcella teleidraulica a perno
avanzato con steli Ø 45 mm (regolabile in
compressione ed estensione)
Corsa sull'asse gambe ......................280 mm
SOSPENSIONE POSTERIORE
Tipo ....................progressiva "SOFT DAMP";
monoammortizzatore idraulico
con molla a precarica regolabile (ulteriore
possibilità di regolazione in estensione)
Corsa ruota........................................285 mm
FRENO ANTERIORE
Tipo (SM 610S) a disco fisso ∅ 320 mm
con comando idraulico e pinza fissa
Tipo (TE 610E) a disco fisso ∅ 260 mm
con comando idraulico e pinza flottante
FRENO POSTERIORE
Tipo ..........................a disco fisso ∅ 220 mm
con comando idraulico e pinza flottante
24
FINAL RATIOS (TE 610E)
1st gear............................................18,389
2nd gear ..........................................12,744
3rd gear .............................................9,492
4th gear..............................................7,670
5th gear .............................................6,445
6th gear..............................................5,409
FRAME
Type ...single-beam frame with round section
steel barts; rear frame made of steel square
FRONT SUSPENSION
Type.................hydraulic forks with advanced
axle; Ø 1.77 in. stanchions (adjustable in
compression and in extension)
Legs axis stroke ................................11.02 in.
REAR SUSPENSION
Type ....................progressive "SOFT DAMP"
Hydraulic single shock absorber with
preload adjustable spring (further
possibility of adjustment in extension)
Wheel stroke .....................................11.22 in.
FRONT BRAKE
Type (SM 610S) fixed disc 12.6 in. dia.
with hydraulic control and fixed caliper
Type (TE 610E) fixed disc ......... in. dia.
with hydraulic control and fixed caliper
REAR BRAKE
Type .......................fixed disc 8.7 in. dia. with
hydraulic control; floating caliper
RAPPORTS TOTAUX DE TRANSMISSION (TE 610E)
1ère vitesse ......................................18,389
2ème vitesse ....................................12,744
3ème vitesse ......................................9,492
4ème vitesse ......................................7,670
5ème vitesse ......................................6,445
6ème vitesse ......................................5,409
CADRE
Type .......monopoutre avec tubes en acier de
section circulaire; cadre arrière en tubes de
section tubes.
SUSPENSION AVANT
Type...........fourche hydraulique télescopique
avec axe avancé et tige de Ø 45 mm.
(Réglable en compression et en extension)
Levée sur l'axe jambes......................280 mm
SUSPENSION ARRIERE
Type ......."SOFT DAMP"; mono-amortisseur
hydraulique avec ressort à précharge
réglable (Possibilité de réglage ultérieur)
Debattement......................................285 mm
FREIN AVANT
Type (SM 610S) à disque fixe ∅ 320 mm
avec commande hydraulique et étrier fixe
Type (TE 610E) à disque fixe ∅ 260 mm
avec commande hydraulique et étrier fixe
FREIN ARRIERE
Type .................à disque fixe ∅ 220 mm avec
commande hydraulique étrier flottant
section carrée en acier