Specifications - Honeywell MicroDock II Operating Manual

Specifications

The MicroDock II is for indoor use only.
Instrument Dimensions
Weight
Enclosure
Operating Temperature
Humidity
Altitude
Storage Temperature
Power Supply
Real-time Clock
Data Storage
External Interface
Pump
Flow Rate
Calibration Gas Cylinder
Inputs
Automatic Tests
Configuration Recognition
Alarm/calibration Parameters User-settable
Calibration Gas Connections
Gas Connection
Solenoid
Led Indicators
Command Keys
Base Station
Docking Module
Communications Method
MicroDock II Automatic Test and Calibration Station
21.2 x 26.3 x 8.2 cm (8.3 x 10.4 x 3.2 in.) base
station and one docking module
0.98 kg (2.15 lb)
Impact resistant PC/ABS (polycarbonate)
+10°C to +35°C (+50°F to +95ºF)
0 to 50%
2000 m (6561.66 ft.)
-10°C to 60°C (14°F to 140 ºF)
6 VDC , 1.5 A wall adapter or four C-cell
batteries (be advised that the main supply
voltage fluctuations are not to exceed 10% of
the nominal supply)
Provides time and date stamp
Automatic (instrument and base station) 128 MB
Delkin Multi-media card data storage system
USB interface for PC
DC motor, micro-diaphragm; 6V PCB mount
Maximum recommended 350 ml/min.
2-gas inlets (standard) 4-gas + air inlets
(maximum)
Functional bump check, calibration, data
transfer, audible alarm, visual alarm
Automatic (instrument and sensor)
Built-in (base station)
1/8" SMC connect sub-miniature coupling
Built-in (docking modules)
(on each docking module)
Yellow – Test
Green – Pass
Red – Fail
Menu navigation
One touch bump check initiation One touch
calibration initiation One touch data transfer
initiation (XD only)
Infrared (two-way) between docking module
and detector
65