Getting Started; Microdock Ii Base Station And Docking Modules - Honeywell MicroDock II Operating Manual

Getting Started

Confirm that the items below are included with the station. If the station is damaged
or parts are missing, contact the place of purchase immediately.
•
Batteries (four replaceable C-cell alkaline batteries)
•
128 MB Delkin Multi-media card (MMC) inserted
•
USB cable
•
Two to four calibration gas hoses (depending upon order at the time of
purchase) with quick connect fittings
•
Inlet filter assembly
•
Power adapter
•
Charger adapter (charger models only)
•
Manual CD including Fleet Manager II software
•
MicroDock II Base Station Quick Start Guide
NOTe
A standard MicroDock II base station is shipped with two inlets. A maximum
of four calibration gas inlets can be included if specified by the user before
purchasing.
To order replacement parts, refer to
For information regarding the operations and functions of the station, refer to the
following figures and tables.
•
Figure 1 MicroDock II Base Station and Docking Modules
•
Figure 2 and Table 2 The MicroDock ll (describes the station)
•
Table 3 Display Elements (describes the station LCD icons)
•
Table 4 Docking Module Pushbuttons
•
Figure 3 and Table 5 Station Pushbuttons
•
Figure 4 and Table 6 Station Connections

MicroDock II Base Station and Docking Modules

Figure 1. MicroDock II Base Station and Docking Modules
To connect additional docking modules and for procedures to correctly insert
detectors into docking modules, refer to Installation.
MicroDock II Automatic Test and Calibration Station
Replacement Parts and Accessories.
11