Gas Cylinder Lot # Field; Pump Setup - Honeywell MicroDock II Operating Manual

14. To enter a lot number for the corresponding gas cylinder, proceed to
Cylinder Lot # Field.
Or
Press
15. Press

Gas Cylinder Lot # Field

Although this field is designed to enter the lot number of the corresponding gas
cylinder, it can be used to enter other data. A maximum of fourteen characters
(letters and/or numbers) can be selected.
16. Press
blank.
17. Press
value.
16. Press
accept the value and automatically move the cursor to the next space.
17. Repeat step #18 for the remaining values.
The following screen displays the corresponding lot number for the attached
gas cylinder.
20. Press
21. To setup another inlet, repeat the procedures listed in the
Concentration
22. When all of the entries are completed, press
options menu.
23. Press

Pump Setup

Refer to Pump Setup
MicroDock II Automatic Test and Calibration Station
exit to return to the user options screen.
exit again to return to the normal operating screen.
to move down to the lot number field. Initially this field is
sel. The changes to * and the cursor displays for the first
or ^ to scroll to the first desired letter/number. Press
exit. The * changes back to the
Level, and the Gas Cylinder Lot # Field sections.
exit again to return to the normal operating screen.
in the Adding Another Docking Module
icon.
Gas
exit to return to the user
section.
Gas
sel to
Type, Gas
31