Display Elements; Pushbuttons; Docking Module Pushbuttons; Station Pushbuttons - Honeywell MicroDock II Operating Manual

Icon
AC Power
Batteries Fully Charged
Batteries Half-Charged
Batteries at Low Level
MultiMediaCard (MMC)
MultiMediaCard (MMC) not inserted
Test Pass and Option Enabled

Pushbuttons

Docking Module Pushbuttons

Pushbutton
BUMP CHECK
CALIBRATION
DATA TRANSFER

Station Pushbuttons

MicroDock II Automatic Test and Calibration Station
Function
Table 3. Display Elements
Description
To bump a detector, press
When connecting a new docking module, press and hold
to send a confirmation signal back to the station.
To calibrate a detector, press
To transfer datalog information from a detector, press
For more information, refer to
Table 4. Docking Module Pushbuttons
Icon
Test Fail and Option Disabled
Cursor and Sensor Disabled
Scroll Up
Scroll Down
Selection Arrow
Selected to Modify
Passcode Protected
BUMP CHECK.
CALIBRATION
Transfer. (=XD only)
Data
Function
BUMP CHECK
DATA TRANSFER.
13