Table of Contents
Advertisement
Chapter 3 – Software
Network Setup > Interfaces
IP Aliases
From this part of the Interface screen you can add Aliase IP addresses to the network interface of the
MultiAccess. With IP aliases, you can assign several additional IP addresses to a network interface. The
MultiAccess will treat the additional addresses as equals to the primary network interface address. IP
aliases are required to administer several logical networks on one network interface. They can also be
necessary in connection with the SNAT function to assign additional addresses to the firewall.
The same IP address cannot be configured many times for an interface. Similarly, the same IP
Note:
address cannot be entered as an alias for two different interfaces.
Interface
From the drop down list box, select the network name to which you want to assign an alias.
IP Address
Enter the network IP address for the network named.
Netmask
Enter the Netmask to be used for this network.
Add
Click the Add button.
The IP alias is displayed in the table at the bottom of the section.
MultiAccess Communications Server MA30120 User Guide
59
Advertisement
Table of Contents
