Add Users - Multitech MultiAccess MA30120 User Manual

Communications server
Hide thumbs Also See for MultiAccess MA30120:
Table of Contents

Advertisement

User Authentication
This menu establishes a RADIUS User database within the MultiAccess. These users will have rights to use
the modems configured for Modem Sharing with RADIUS Authentication and the modems configured for RAS.
Internally, these user accounts are contained in a file called "users". This file is considered "local" to the
RADIUS server - however this reference and these user accounts are separate for the Local Users of the
MultiAccess Linux Operating System. The RADIUS Server will check it's local users file first, and if a match of
username and password is not found, it will proceed to check the Local Users of the Linux system.

Add Users

Username
Up to 15 alphanumeric characters, case sensitive, can be used with the exception of four capitol letters (C,
P, S & U). The four capitol letters can not be used as the 1
authentication failure.
Password
This is the password that the remote user will use. The password can have as many as 15 alphanumeric
characters and is case sensitive.
MultiAccess Communications Server MA30120 User Guide
User Authentication > RADIUS Server > User Setup
> RADIUS Server > User Setup
st
letter of a user name. Doing so results in
Chapter 3 – Software
83

Advertisement

Table of Contents
loading

Table of Contents