Bobbin Winding - Vertical Spool Pin - Viking Interlude 445 User Manual

Bobbin Winding – Vertical
Spool Pin
Place an empty bobbin with the mark
1
out-wards on the bobbin spindle
and bring it down.
Place the large spool holder under
2
the thread on the spool pin.
Bring the thread under the thread
3
guide (a) and over thread guide (b),
further under thread guide (c).
From above wind a few turns of
4
thread around the bobbin and into
the knife.
Press the foot control. When the
5
bobbin winding is fi nished, remove
the bobbin, cut off the thread and
bring the bobbin spindle up.
b
a
c
Learn your Interlude
9