Viking Interlude 445 User Manual page 53

Fabric Does Not Move?
• Feed teeth up.
• Increase stitch length.
Bobbin Thread Breaks?
• Wind a new bobbin.
• Replace the bobbin in the machine,
check correct threading, page 10
• If stitch plate hole is damaged -
replace stitch plate.
• Clean bobbin area.
Bobbin Winds Irregularly?
• Check threading for bobbin winding.
Wrong Stitch, Irregular or Narrow
Stitches?
• Turn machine off and on to reset.
• Change needle, rethread top and
bobbin threads.
• Use stabilizer.
Machine Sews Slowly?
• Check speed
• Remove stitch plate and brush lint
from bobbin and teeth area.
• Have the sewing machine serviced at
your dealer.
Machine Will Not Sew?
• Put bobbin winder spindle up into
sewing position.
• Check plugs are all the way into
machine.
• Check wall plug and power to wall
plug.
Have your Interlude
Serviced Regularly by your
Husqvarna Viking Dealer!
If you have followed this trouble
shooting information and still are having
sewing problems, take the sewing
machine to your dealer. If there is a
specifi c problem, it is a great help to
test sew with your thread on a scrap of
your sewing fabric and bring it to your
dealer. A sewing sample will often give
much better information than words.
Non-Original Parts and Accessories
The Interlude warranty does not cover
any defect or damage caused by use of
non-original accessories or parts.
Care of your Interlude
51