Viking Interlude 445 User Manual page 17

Fix
By using the button you can tie
FIX
off a stitch at the beginning and/or
at the end. The sym bol
on the dis play indicates that
selected.
FUNC
Touch this button to step between
the different modes on your
Interlude. There are three different
modes; ,
NORM PROG
mode (normal sewing mode)
NORM
is always active when the machine
is turned on. Touch once to activate
the program mode (used when
programming), then touch again to
enter the mode that is used to
REP
sew a programmed combination.
Touch again to return to
mode. The active mode is indicated
on the InfoDisplay.
CLR
Touch this button in
the whole or a part of a program
(see page 21). When a program in
a memory has been deleted, the
stitch number is cleared on the
InfoDisplay.
Arrow Buttons
These buttons are used to advance
or return within a programmed
sequence.
fl ashing
is
FIX
and . The
REP
NORM
to delete
PROG
Functions and InfoDisplay
Stitch Selection Buttons
You select a stitch from the
panel by pressing the stitch
selection buttons.
With left button you get tens
and with right button you get
1-9. The number of the selected
stitch is displayed to the right
on the InfoDisplay.
15