Winding The Bobbin - Viking Huskystar 215 User Manual

1
2
5
6

Winding the Bobbin

3
4
7
NOTE: Return the bobbin winder spindle to the left
9
1 Pull the handwheel out to dis en gage.
2 Draw the thread from the spool.
Guide the thread around the bobbin
winder thread guide.
3 Insert the thread through the hole in the
bobbin from the inside to the outside.
Put the bobbin on the bobbin winder
spindle.
4 Push it to the right.
5 With the free end of the thread held in
your hand, depress the foot control. Stop
the machine when it has made a few
turns, and cut the thread close to the
hole in the bobbin.
6 Depress the foot control again. When
the bobbin is fully wound, stop the ma-
chine. Return the bobbin winder spindle
to its original position by moving the
spindle to the left, and cut the thread.
7 Push the handwheel to the left to re-en-
gage. (original position).
when the machine stops.