Unpacking; Pack Away After Sewing - Viking Interlude 445 User Manual

Unpacking

Place the machine on the table or
1
cabinet, remove the packaging and
lift off the carrying case.
Remove the side parts of the
2
packing material, the foot control
and fi nally the protection cover.
The machine is delivered with an
3
accessory bag, a main cord and a
foot control cord.
Wipe the machine, particularly
4
around the needle and needle plate
to remove any soil before sewing.
Packing Away After Sewing
Press the power switch to turn off the
1
machine.
Unplug the cord from the wall socket
2
fi rst and then from the machine.
Wind the main cord around your
3
hand and place the cord in the
pocket of the hard cover.
Unplug the foot control cord from the
4
machine. Wind the foot control cord
around your hand and place it in the
space of the foot control.
Check to ensure that all accessories
5
are in the accessory tray. Slide the
tray on to the machine around the
free arm.
Place the foot control, with the
6
underside towards you, fi tting into
the recess of the accessory tray at the
rear side of the machine.
Learn your Interlude
3