Viking Interlude 445 User Manual page 24

Functions and InfoDisplay
Change a Stitch
Any stitch can be changed in
PROG
when the stitch number is shown on
the InfoDisplay. Simply step through
the stitch combination with the arrow
buttons until you see the number of the
stitch you would like to change, and
select the correct stitch to replace it.
Adjust Stitches in a Program
If you want to adjust a stitch in a
programmed stitch combination use the
arrow buttons to step to the stitch. You
can adjust the stitch length and width
and mirror image a stitch.
The adjustments will automatically be
stored in the permanent memory
Sew your Program
To sew your program, touch to
FUNC
bring up the mode. Presser foot B is
REP
recommended. A stop is indicated by a
symbol.
To check your stitch sequence, use
the arrow buttons to move forwards/
backwards in the sequence.
Sew your program on a stabilized piece
of fabric.
Mirror image side to side
In and only the stitch
NORM PROG
selected is mirrored. In the entire
REP
pro gram is mirrored. You can also
change the straight stitch needle
position from left to right by mirror
imaging the width.
When mirror image side to side is
selected, the symbol will be shown
on the Infodisplay.
22