Programming - Viking Interlude 445 User Manual

Programming

With Interlude you can program stitches into combinations.
The program is automatically saved in the machine memory
and is retained even when the machine is turned off.
PROG mode
When programming, the Sewing Advisor
(445) is not active. Touch
activate the mode.
PROG
Move between programmed stitches
Use the arrow buttons to move between
the stitches, and check what has been
programmed. On the InfoDisplay you
see the number of the stitch in the
programming sequence.
Delete Stitches or Programs
If there is a stitch combination in
the memory, touch
memory. The memory is cleared from
the current position until the end. To
reload a deleted program, touch
again before you enter new stitches or
before touching the arrow buttons.
Program Stitches
The memory holds up to 30 (445) / 25
(435) stitches. To program the stitch
combination shown:
• Touch to activate
FUNC
• Select a stitch e.g. 22 (445). The stitch
is now entered in the memory. Touch
the arrow button.
• Select another stitch e.g. 23 (445).
Touch the arrow button.
In this way you can combine different
stitches according to your own taste and
imagination. With the arrow button you
can go backwards to see what you have
programmed.
to
FUNC
to clear the
CLR
CLR
.
PROG
Functions and InfoDisplay
Note:
If you want to sew your programmed
stitch combination only once, touch
. You can also program
REP
programmed will be indicated by
STOP
on the InfoDisplay.
in
in . The
STOP PROG
21