Sewing Pop-Up Messages - Viking Designer Topaz User Manual

Sewing pop-up messages

Bobbin winding on
(model 20)
This pop-up message appears when the bobbin winder is pushed
to the right and bobbin winding is activated.
Bobbin winding on
(model 30)
This pop-up message appears when the bobbin winder lever is
pushed towards the bobbin and bobbin winding is activated.
Press the OK button to start/stop winding and use the left/right
arrow buttons to adjust the winding speed.
Presser foot too high
Your machine will not sew if there is too much fabric under the
presser foot. Remove some of the fabric or use another fabric.
Press the OK button, or tap the foot control to close the pop-up
message.
Machine set for twin needle
When you have set the machine for twin needle in the SET Menu,
a pop-up message is shown to remind you of the setting when
you turn on your machine. Press the OK button or tap the foot
control to close the pop-up message.
Stitch width limited for twin needle
This message is shown when the machine is set for twin needle
and you try to adjust the stitch width to wider than possible with
the twin needle. Close the pop-up message by pressing the OK
button.
Machine set for straight stitch
This message is shown when the stitch width safety is on and you
turn on the machine or try to adjust the stitch width. Close the
pop-up message by pressing the OK button.
Sewing Mode
2
41