Adjust Designs - Viking Designer Topaz User Manual

Adjust designs

There are many options to adjust your designs. Always adjust
before starting to stitch-out. The settings are shown on the
GraphicDisplay. If you change the numbers for width and height
the gures will be inverted on a black background. The changes
are also visible on the GraphicDisplay.
Design height (1)
You can increase or decrease the size of the design up to 20%.
Increase or decrease the design height using the + and – buttons
below the setting displayed on the GraphicDisplay. The design
height is scaled 5% each time you press the button. The stitch
count remains the same.
Design width (2)
You can increase or decrease the size of the design up to 20%.
Increase or decrease the design width using the + and – buttons
below the setting displayed on the GraphicDisplay. The design
width is scaled 5% each time you press the button. The stitch
count remains the same.
Note: You can Resize the design in the 5D™ Embroidery Software (sold
separately).
Moving designs to position (3)
Place your design anywhere in the embroidery area using the
arrow buttons. The numbers to the right of the Design position
icons on the GraphicDisplay show in millimeters how much
the design has been moved vertically and horizontally from its
original center position.
Rotate (4)
You can rotate the design around its center point. Each time
you press the Rotate button, the design will rotate 90 degrees
clockwise. To the right of the rotate icon on the GraphicDisplay
you can see how many degrees the design has rotated from its
original position.
Note: Some designs are too large to rotate 90 degrees. Each press
of the button will then rotate the design 180 degrees.
Mirror End-to-End
Press the Mirror End-to-End button to mirror the loaded design
end to end. An icon is shown on the GraphicDisplay indicating
that Mirror End-to-End is selected.
Mirror Side-to-Side
Press the Mirror Side-to-Side button to mirror the loaded design
side to side. An icon is shown on the GraphicDisplay indicating
that Mirror Side-to-Side is selected.
62
Embroidery Mode
(Only on model 30)
1 2
4
3