Viking Designer Topaz User Manual page 67

Embroidery Mode
Embroidery too large
This pop-up message appears if the design you are trying to load
is too large to be sewn on your machine. Press the OK button to
close the pop-up and select another design.
Cannot select correct hoop
If you are trying to load a design that is too large for the
selectable hoops this pop-up message will appear. If you have set
the hoops that you own in the My Hoops list in the SET Menu
you will not be able to load designs that are too large to t in the
hoops that you have set. Make sure that you have selected the
correct hoops in the My Hoops list or load another design.
Stop command in design
Your machine stops automatically for you to trim the fabric on
cut work, applique etc. See explanation for each design in the
Embroidery Sampler Booklet.
This will restart and clear all adjustments,
return to stitch out?
This pop-up message will appear if you press the PROG button
in Embroidery Mode to go back to the text editor and change an
existing embroidery text. If you select "No" the text editor will
open and all your adjustments made in Embroidery Mode will
5
be cancelled. If you select "Yes" you will return to Embroidery
Mode and all your adjustments will be kept. Use the arrow
buttons to select "Yes" or "No" and press the OK button.
67