Strong SRT 5020X User Manual page 25

Auto search
An auto search repeats the scan the
channels and radio stations that can be detected in your area, and adds them to your channel list.
1. Press SCAN on the remote control.
A search commences, and channels and stations are listed on the screen as they are detected.
At the end of the scan, the channel with the lowest number is displayed.
NOTE: If you get a black screen when scanning is finished, the
to show a high-definition TV channel. The
broadcasts. In this case, press CH▼ or CH▲ until a standard-definition channel appears.
Manual search
You can only search for TV channels, not radio stations, with the manual search feature.
There are two ways to manually search for a channel: by specifying the LCN (logical channel
number) and by specifying PID information.
Method 1: specifying the LCN (logical channel number)
1. Press MENU on the remote control. The Digital TV menu appears.
2. Press OK. The first item in the sub-menu—Channel Manager—is highlighted.
3. Press CH▼ to highlight Installation and then press OK. The Installation menu appears.
4. Press CH▼ to highlight Manual Search and then press OK. The Manual Search window appears.
did when you first turned it on. It searches for all
cannot display high-definition
25
is attempting