Table of Contents
Advertisement
4. Press CH▼ until Time is highlighted, and then press OK. The Time window appears.
You can set the date and time manually, or have the
automatically based on how many hours in front of, or behind, Greenwich Mean Time your
location is.
To set the date and time automatically, follow steps 5–10 below and ignore the steps after step
10.
To set the date and time manually, follow steps 11–16 below.
5. With Timer Mode highlighted, press VOL
GMT Offset option is highlighted.
6. Press VOL
to move to the list of values for the GMT Offset.
7. Press CH▼ or CH▲ until you have highlighted the number of hours in front of, or behind,
Greenwich Mean Time your location normally is (that is, when there is no daylight saving). For
example, if you are in Melbourne, Brisbane, Hobart, Canberra or Sydney, you would press CH ▼
until +10:00 is highlighted; if you are Adelaide or Darwin, you would press CH ▼ until +09:30 is
highlighted; and if you are in Perth, you would press CH ▼ until +08:00 is highlighted.
8. Press OK.
9. If the current time has been adjusted for daylight saving, press CH▼ to highlight Summer Time
and then press VOL
10. Press OK.
The Configuration menu re-appears. You can continue with other set-up tasks (see below), or
press EXIT to return to TV viewing.
Ignore the rest of this procedure. The remaining steps are for manually setting the date and time.
or VOL
or VOL
to select ON.
to highlight Auto and then press CH▼. The
18
set the date and time
Advertisement
Table of Contents
