Clearing And Resetting Data - Strong SRT 5020X User Manual

7. Locate the software upgrade file. (Press CH▼ or CH▲ to navigate down or up through the
folders. Press OK to open a folder, or press EXIT to return to the parent folder.)
8. With the software upgrade file highlighted, press OK.
When the upgrade is finished, the
that all previous data stored on your
TIP: You can also upgrade using the RS-232C port on the back of the
Strong Technologies website will have instructions on how to do this.

Clearing and resetting data

WARNING: This procedure returns the
(such as time and date, channels, stations and timers) will be lost.
1. Press MENU on the remote control and then press OK.
2. Press CH▼ or CH▲ until Factory Default is highlighted and then press OK.
3. A warning message appears asking you to confirm that you want to return the
default settings. To continue, press VOL
You will need to rescan in order to view channels or listen to radio stations.
will restart. Remove the USB memory stick. Note
will have been deleted.
to its default factory settings. All data
or VOL and then OK; otherwise press OK to cancel.
47
. The
to its