Configure Macro
Enable Remote Printer Management
This sets the printer's diagnostic port to Ethernet, without having to navigate
through the printer's operator panel.
It performs the following in the background:
1. Opens a command prompt session.
2. Executes a telnet command to the printer's IP address.
3. Logs in as root.
4. Executes the enable printermgr telnet command.
5. Closes the command prompt session.
NOTE: You must have Telnet root privileges to use this utility. See "Telnet
Root Password" on page 58.
Select Utilities Enable Remote Printer Management, and the following
dialog box opens:
Figure 123. Enable Remote Printer Management Dialog Box
Click Yes to continue.
When remote printer management has been enabled, the following dialog box
opens:
Figure 124. Remote Printer Management Enabled
143