Operator Panel Method - IBM 6400 Series User Manual

Operator Panel Method

6500 Series Line Matrix Printers
1. On the operator panel, press the STOP key to take the printer offline.
2. Press RETURN and ENTER at the same time to unlock the ENTER key.
3. Press MENU. QUICK SETUP displays.
4. Press ↑ SCROLL until PRINTER CONTROL displays.
5. Press ENTER. INTERFACE SELECTION displays.
6. Press ↓ SCROLL until PRINTER MANAGEMENT PORT displays.
7. Press ENTER. DISABLE displays. If ETHERNET displays, go to step 10.
8. Press ↓ SCROLL until ETHERNET displays.
9. Press ENTER. As asterisk (*) appears next to ETHERNET.
10. Press RETURN and ENTER at the same time to lock the ENTER key.
11. Press START to put the printer back online.
6400 Series Line Matrix Printers
1. On the operator panel, press the STOP key to take the printer offline.
2. Press SCROLL ↑ and SCROLL ↓ at the same time to unlock the ENTER
key.
3. Press SCROLL ↑, SCROLL ↓, ENTER, and RETURN keys at the same
time to enter the Serivce menu.
4. Press SCROLL ↓ until PRINTER MGMT displays.
5. Press ENTER until DIAGNOSTIC PORT displays.
6. Press ENTER again to see the current selection.
7. Press SCROLL ↓ until Debug Ethernet or Debug Adapter displays.
8. Press ENTER to select it.
9. Press SCROLL ↑ and SCROLL ↓ at the same time to lock the ENTER
key.
10. Press START to put the printer back online.
6700 Series Thermal Printers
1. On the operator panel, press the PAUSE key to take the printer offline.
. .
2. Press to place the printer in Menu mode. QUICK SETUP displays on
.
the operator panel.
↵
3. Press ↓ and
at the same time to unlock the
4. Press - until PRINTER MGMT displays.
5. Press ↓ until PNE Port displays.
NOTE: If PNE Port does not display, see "Factory Menu" below.
Operator Panel Method
↵
key.
11