IBM 6400 Series User Manual page 47

Next, click Add to define a new task (see Figure 31). In the new task item,
specify the following information, then click Apply or OK.
Email Address: Enter the e-mail address where you want the PMU
to send the alert messages.
Device: To choose a device item you want the PMU to monitor, such
as a folder, specific printer, or a range of IP addresses.
First: To set the beginning IP address in a polling range. Use this
option if you select Range: as the Device option.
Last: To set the last IP address in a polling range. Use this option if
you select Range: as the Device option.
NOTE: In the remaining alert option fields, select enable or disable as
desired.
Offline, Warning, Media Input, Media Output, Media Path, Marker,
Cutter, Barcode, RFID, Scanner, Label, Intervention Needed,
Consumables, and Power Cart: For a description of the alert groups
and printer events, refer to "Alert Groups" in the SNMP Configuration
section of chapter three in the Ethernet Interface User's Manual . All
options are enabled by default.
Comment: Enter comments as needed.
Figure 32. Status Monitoring Properties:
Alert Delivery Tab – Syslog Posting Sub-Tab
The Status Menu
47