IBM 6400 Series User Manual page 48

Chapter 2
The Menu Bar
3. Syslog Posting: Used in a UNIX operating system, it allows the PMU to
log alerts to a file located in the PMU installation directory. To log alerts,
check the Enable Syslog check box, then click Add (see Figure 32). A
task item adds to the log list. In the task item, specify the following as
applicable, then click Apply or OK.
NOTE: In the remaining alert option fields, select enable or disable as
48
Machine Address: The UNIX IP Address.
Port: See your system administrator.
Device: To choose a device item that you want the PMU to monitor,
such as a folder, specific printer, or a range of IP addresses.
First: To set the beginning IP address in a polling range. Use this
option if you select Range: as the Device option.
Last: To set the last IP address in a polling range. Use this option if
you select Range: as the Device option.
desired.
Offline, Warning, Media Input, Media Output, Media Path, Marker,
Cutter, Barcode, RFID, Scanner, Label, Intervention Needed,
Consumables, and Power Cart: For a description of the alert groups
and printer events, refer to "Alert Groups" in the SNMP Configuration
section of chapter three in the Ethernet Interface User's Manual . All
options are enabled by default.
Comment: Enter comments as needed.