Advertisement
Quick Links
QUALITY FEATURES FOR BETTER PICTURES,
EASIER OPERATION, LONGER LIFE
• Completely automatic operation...
F lip the switch and built-in adjustable limit
switches control up and down travel.
• S tops in intermediate positions...
f or wide screen projection.
• Easily installed...
F astens to wall or ceiling with two screws or
hooks. Cord plugs into standard outlet
(110-120AC or 220-240AC based on model
ordered).
• Always ready for the show...
N o storage problems. Attractive slimline metal
case makes a handsome addition to any room.
• Incomparable picture reproduction...
with Da-Lite's High Power or Matte White
surface.
• Ideal projection screen...
for family centers, recreation rooms, dens,
clubs, church rooms, offices, classrooms,
small conference rooms.
Visit www.da -lite.com/products/tutorials.php
to find installation and troubleshooting
tutorials. You will also find a link to Live Chat
for interactive support and you can contact us
by email at info@da-lite.com or by phone at
(800) 622-3737 or (574) 267-8101 with any
troubleshooting questions.
DA-LITE IS MORE
THAN PROJECTION SCREENS
Da-Lite Tripod, Wall and
Ceiling and Electric Screens
Da-Lite
Monitor Mounts
Da-Lite Lecterns
Da-Lite
Project-O-Stands
and Easels
Printed in U.S.A.
The Da-Lite Difference.
Operating Instructions
for
SlImlIne electrOl®
72641 Rev. 1/08
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
Advertisement
Related Manuals for Da-Lite SLIMLINE ELECTROL
Summary of Contents for Da-Lite SLIMLINE ELECTROL
- Page 1 You will also find a link to Live Chat for interactive support and you can contact us by email at info@da-lite.com or by phone at DA-LITE SCREEN COMPANY, INC. Operating Instructions (800) 622-3737 or (574) 267-8101 with any...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS OPERATING INSTRUCTIONS 3-POSITION SWITCH FOR SLIMLINE TO LOWER SCREEN SURFACE Complete with cable, is standard with the Slimline Electrol. Press lower end of slide switch. Screen will stop in When using your video equipment, basic safety the “DOWN” position automatically. precautions should always be followed, including the following: TO RAISE SCREEN SURFACE Press upper end of slide switch. Screen will stop in 1. Read and understand all instructions before the “UP” position automatically. using. TO STOP SCREEN 2. Position the cord so that it will not be tripped Screen may be stopped in any intermediate over, pulled, or contact hot surfaces. position by positioning slide switch to center “OFF” position. 3. If an extension cord is necessary, a cord with a NOTE: It is suggested that when screen is not in current rating at least equal to that of the use, the slide switch should be positioned to...
Need help?
Do you have a question about the SLIMLINE ELECTROL and is the answer not in the manual?
Questions and answers