imagistics DL200 Operating Manual page 76

<When Finisher 9748 or Mailbin Finisher is
mounted>
1
Touch the desired finishing function key.
2
Touch [Corner Staple].
With Corner Staple, the staple is driven into the
copies at the location shown below:
Paper size : 11×17 L to Letter
Type of paper : Plain paper,
A
No. of sheets to be stapled together:
Mailbin Finisher : 2 to 50
4015O001AA
Finisher
NOTES
• When [Corner Staple] is touched with Non-Sort
selected, the Finisher is automatically set into
the Sort mode.
• Stapling is not possible in the Interrupt mode.
• Stapling position cannot be specified if the
machine is equipped with a Finisher 9748 or
Mailbin Finisher. When a Mailbin Finisher is
mounted, however, stapling position can be
specified if the function is combined with Hole
Punch.
• Check the correct direction of the originals
when making copies in the Staple mode.
4012P033CB
• If an original is placed directly on the Original
Glass in a Staple mode, Separate Scan is
automatically set. p.3-61
• Make sure that the maximum number of sheets
to be stapled together is not exceeded when
making copies in the Staple mode.
4012P034CB
recycled paper
: 2 to 30
4. Selecting the Finishing Function
p.3-26
3-23