imagistics DL200 Operating Manual page 165

5-26
6. Settings in Admin. Management
Setting the Account Number
The Account Number can be programmed or changed only when "100 Accounts 1" is set.
1
To display [Copy Track] on the Touch Panel,
follow the steps given in "Setting Admin.
Management." p.5-20
2
Touch [Copy Track].
3
Touch [Copy Track Data].
4
Select the page number on which the target
account is shown.
5
Touch the [No.] key of the target account.
6
Enter the desired Account Number from the
10-Key Pad. Touch [Enter].
4012P150CC
NOTES
4012P154CB
• The account number should be a 4-digit
number.
• If a new account number is programmed, the
old one will be erased.
• If a new account number entered already exists
for another account, the entry will be rejected.
Enter a different account number.
Useful Tips
• If you have entered an incorrect number, press
the Clear key, then enter the correct number.
• If you want to change or program another
account number, repeat steps 4 through 6.
4013P155EC
7
Touch [Exit].
4012P156CB
1166O030AA