At-Mio-16E-10 And At-Mio-16De-10; Input Characteristics - National Instruments AT-MIO/AI E Series User Manual

AT-MIO-16E-10 and AT-MIO-16DE-10

Analog Input
National Instruments Corporation

Input Characteristics

Number of channels ...........................16 single-ended or 8
Type of ADC .....................................Successive approximation
Resolution ..........................................12 bits, 1 in 4,096
Max sampling rate..............................100 kS/s guaranteed
Input signal ranges .................
Input coupling ....................................DC
Max working voltage
(signal + common mode) ............ Each input should remain within
Overvoltage protection....................... 35 V powered on, 25 V
Inputs protected .......................... ACH<0..15>, AISENSE
FIFO buffer size.................................512 samples
differential, software selectable
Board Gain
(Software
Selectable)
0.5
1
2
5
10
20
50
100
11 V of ground
powered off
A-11
Board Range
(Software Selectable)
5 V 0-10 V
10 V —
5 V 0 to 10 V
2.5 V 0 to 5 V
1 V 0 to 2 V
500 mV 0 to 1 V
250 mV 0 to 500 mV
100 mV 0 to 200 mV
50 mV 0 to 100 mV
AT-MIO/AI E Series User Manual