National Instruments AT-MIO/AI E Series User Manual page 120

Appendix A Specifications for AT-MIO-16E-1, AT-MIO-16E-2 and AT-MIO-64E-3
Bus Interface
Power Requirement
Physical
Environment
AT-MIO/AI E Series User Manual
Digital Trigger
Compatibility .....................................TTL
Response............................................Rising or falling edge
Pulse width ........................................10 ns min
RTSI
Trigger lines.......................................7
Type...................................................Slave
+5 VDC ( 5%)...................................1.0 A
Power available at I/O connector .......+4.65 VDC to +5.25 VDC
Dimensions
(not including connectors) .................33.8 by 9.9 cm (13.3 by 3.9 in.)
I/O connector
AT-MIO-16E-1,
AT-MIO-16E-2........................... 68-pin male SCSI-II type
AT-MIO-64E-3........................... 100-pin female 0.050 D-type
Operating temperature........................0 to 55 C
Storage temperature ...........................-55 to 150 C
Relative humidity...............................5% to 90% noncondensing
at 1 A
A-10 National Instruments Corporation